The Functional Templar Knight Medieval Battle Sword by Mariano Zamorano of Toledo Spain is a hand forged replica reproduction of a Templar Knight medieval combat sword circa the 13th century and displays the Templar Cross on the pommel. This functional medieval broad sword was painstakingly hand made with a carbon steel blade as well with trimmings made by hand in iron by the world famous, fifth generation, Toledo Spain swordsmith Mariano Zamorano. Bearing the famous "MZ" trademark, this limited production sword is a prized collectible for the discriminating collector.
This fully functional Handmade Medieval Templar Knight sword is tailored to meet the demands of reenactment and stage combat.
Overall length: 49"
Blade Length: 39"
Blade Material: Hand Forged Carbon Steel
Handle Material: Genuine Leather Wrapping - trimmings made by hand in iron
Excellent balance
Factory: Mariano Zamorano , Toledo Spain
Rated: Fully Functional - (not honed) - Meets the demands of re-enactment and stage combat
This sword is entirely made by hand and thus may display the visual "imperfections" of being handcrafted
This item is hand made to order - eta is 4-6 months
Item # RCCASSHFCFL02TS
The Paul Chen Modern Fencing Practice Foil
The Paul Chen Modern Fencing Practice Foil is used for practice sessions by fencers worldwide. This sport fencing weapon is ideal for the recreational fencer. Featuring a blade of tempered high-carbon steel, forged under strict quality control standards, the weapon is built for the foil fencing discipline. The handle is molded rubber, with an aluminum guard and plated steel pommel. The Paul Chen Modern Fencing Practice Foil is weighted for exact balance.
This fully functional Modern Fencing Practice Foil sword is tailored to meet the demands of reenactment and stage combat.
One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century
Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the
military saber. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this fencing style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre deuling at the Military Masters School in Rome.
The hilt of the Paul Chen Hutton Fencing Saber , with its stainless steel guard and wire-wrapped sharkskin-pattern grip , is designed to the style of the true military sabre. The high-carbon flex-tempered steel blade
has a rounded tip for effective training and safety.
This fully functional fencing saber sword is tailored to meet the demands of reenactment and stage combat.
One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century
Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military saber. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this fencing style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre deuling at the Military Masters School in Rome.
The hilt design developed by Radaelli has been reproduced in the Paul Chen Radaelli Fencing Saber , with a stainless steel guard and wire-wrapped sharkskin-pattern grip. The high-carbon flex-tempered steel blade closely follows the proportions of the period and are button-tipped for safety. A replacement blade is available for the Paul Chen Radaelli Sabre.
This fully functional fencing saber sword is tailored to meet the demands of reenactment and stage combat.
One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military saber. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this fencing style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre deuling at the Military Masters School in Rome.
The hilt design developed by Pecoraro has been reproduced in the Paul Chen Pecoraro Fencing Saber , with a stainless steel guard and wire-wrapped sharkskin-pattern grip. The high-carbon flex-tempered steel blade closely follows the proportions of the period and are button-tipped for safety. A replacement blade is available for the Paul Chen Pecoraro Sabre.
This fully functional fencing saber sword is tailored to meet the demands of reenactment and stage combat.
Item # RCCASSH2208TS
The Paul Chen Solingen Main Gauche Dagger
The Solingen Main Gauche Dagger is historically based on models of 17th century main gauche daggers of Germanic ancestry.
The Solingen Main Gauche Dagger with the matching Rapier Sword
is an excellent rendition of the timely originals. The blades are constructed of forged high-carbon steel and are
equipped with leather scabbards.
This main gauche and the matching rapier blade produced by Hanwei are now interchangeable with blunted
Practical Sparring blades (orderable upon request) , which are designed for safety in rapier sparring.
Also available are antiqued versions of the Solingen Rapier
with matching main gauche (orderable upon request).
This fully functional Battle Ready dagger is tailored to meet the demands of re-enactment and stage combat.
Paul Chen Practical Basket Hilt Mortuary Sword
by Hanwei
Item # RCCASSH2076TS
The Paul Chen Practical Basket Hilt Mortuary Sword with Scabbard
The Paul Chen Practical Basket Hilt Mortuary Sword is built for the re-enactor. Replicated from an original in the collection of the Royal Armouries in England , the Mortuary Hilt Sword is a classic example of a cavalry or dragoon officer’s sword of the 17th century English Civil War period. Deriving its name from the style of sword which memorialized King Charles I, who was executed in 1649, The Mortuary Hilt Sword’s steel basket is decorated with scrolled foliage . The blade is unsharpened, with a 1/16” edged and a rounded tip, complying with the combat rules of many re-enactment societies.
This fully functional Battle Ready rapier sword is tailored to meet the demands of re-enactment and stage combat.
Paul Chen Practical Basket Hilt Broadsword Sword
by Hanwei
Item # RCCASSH2059TS
The Paul Chen Practical Basket Hilt Broadsword Sword with Scabbard
The Paul Chen Practical Basket Hilt Broadsword is built for the re-enactor. The blade is unsharpened, with 1/16” safety edges and rounded tips, complying with the combat rules of many re-enactment societies. The blade is crafted in 1065 high-carbon steel, hardened to 50HRC, which reduces edge-notching to acceptable levels while providing resilience and protection against brittleness. The scabbard is finished in matte black, ready for owner customization if desired.
Although Basket Hilt swords appeared throughout Britain from the mid-sixteenth century on, their association with the seventeenth and eighteenth century Scottish highlander has become legendary. Early highland swords almost invariably carried the double-edged "broadsword" blade but by the time of the Battle of Culloden (1746) the single-edged "backsword" was at least equal in popularity.
This fully functional Battle Ready broad sword is tailored to meet the demands of re-enactment and stage combat.
Item # RCCASSH1098TS
The Paul Chen Practical Rapier Sword
The Practical Rapier utilizes the SCA ( Society for Creative Anachronism )combat approved 43" Schlager blade. The tapered blade form provides superior balance compared to the traditional parallel sided schlagers of the same length, making for a faster sword. The high-carbon steel blade provides good flexibility and is button-tipped for safety.
This fully functional Battle Ready rapier sword is tailored to meet the demands of re-enactment and stage combat.
Item # RCCASSH2000TS
The Paul Chen Sir William Marshall Sword
The single-hand Battle Ready Sir William Marshall Sword sets new standards of quality and authenticity in broadsword construction. The sword is based on an original , now in a British musuem , used by one of England’s finest knights, Sir William Marshall, who served the crown faithfully under Henry II , Richard the Lionheart and Jack Lackland. The singlehand Sir William Marshall Sword is available with either a forged high-carbon steel blade (below) or a forged - folded Swedish powder steel Damascus blade ( orderable upon request - $819.00 ). Both blades are identical in handling characteristics and both are tempered to a tough HRC 52. The blade section features a central ridged fuller and full-length distal taper - a tough test for the bladesmith but resulting in a superb combination of speed and strength. The grip is leather wrapped and laced and the guard and pommel are elegant in their functional simplicity. The scabbard is leather covered with steel mounts. Truly a sword for the connoisseur.
This fully functional Battle Ready broad sword is tailored to meet the demands of re-enactment and stage combat.
Item # RCCASSH2046TS
The Paul Chen Practical Single Hand Sword
The Practical Single-Hand Sword is based on the
Sir William Marshall sword , so named for one of England’s finest knights of the latter half of the 12th century. The sword is classically styled , with a cruciform hilt , wheel pommel and a ridged and fullered blade that is both stiff and surprisingly light. With a weight of less than 2 ½ lbs. , the sword can be wielded forcefully without undue wear and tear on the arm.
The Battle Ready Practical SingleHand Sword is styled on authentic historical swords but it is tailored to meet the needs of the re-enactor for stage combat at a very affordable price. This very popular and affordable weapon features authentic hilt styling , with a fully tempered un-edged and un-pointed blade. The Practical Single Hand Sword is designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies. The blade is crafted from 1065 high-carbon steel , hardened to HRC 50 , which restricts edge notching to acceptable levels while providing resilience and protection against brittleness. While the blade is substantial , it is fullered to provide balance and good handling characteristics. The Practical SingleHand Sword blade features 1/16" wide edges and a rounded tip for safety. The tang is also substantial , with radiused corners at the blade shoulder and no welds. The end of the tang is riveted over the pommel , which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grip is leather covered. The scabbard is fabricated in glass-filled resin, to provide great impact resistance , to eliminate swelling and to minimize blade corrosion problems. The scabbard now features belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona.
This fully functional Battle Ready broad sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 36 1/2"
Sword Weight: 2 lbs 7 oz
Blade Length: 30"
Blade Material: High-carbon forged steel blade 1/16" wide edges and a rounded tip for safety
Item # RCCASSH2047TS
The Paul Chen Practical Viking Sword by Hanwei
The Battle Ready Paul Chen Practical Viking sword by Hanwei is based on the Godfred sword , whose design originated in 9th century Scandinavia. The lobate pommel and down-turned guard are typical of Viking swords of the period, as is the broad blade with its deep, full-length fullers. The sword is well-balanced and, with a weight slightly over 2 lbs., it is very quick.
Our Practical broadswords are all based on authentically styled swords in the
Paul Chen collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems. The scabbards now feature belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona.
This fully functional Battle Ready broad sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 33 1/2"
Sword Weight: 2 lbs 2 oz
Blade Length: 28"
Handle Length: 5 3/4"
Blade Material: High-carbon forged steel blade
Handle Material: Leather wrapped
Scabbard: glass-filled resin , wood-grain finish
Authentic styled sword of a museum piece
Excellent balance
Made for the re-enactor , Complies with safety requirements
Item # RCCASSH2034TS
The Paul Chen Hand-and-a-Half Sword
The Battle Ready Paul Chen Hand-and-a-Half Sword is authentically replicated from a sword thought to be that of Albrecht II of Austria and represents the pinnacle of beauty and balance in medieval swords. Classically simple in design with a flattened diamond-section blade and cruciform hilt, the original sword dates from the early part of the 15th century. The "Lion Rampant" emblem of the Habsburg dynasty is engraved in the pommel, while the Passau "Running Wolf" guild mark and a marigold maker’s mark appear on the blade fuller. Both the grip and the scabbard of the half and a half sword are leather covered over a cord wrap. Fully functional and ready for re-enactment battles, the Paul Chen Hand-and-a-Half Sword offers excellent handling and balance.
This fully functional Battle Ready broad sword is tailored to meet the demands of reenactment and stage combat.
Paul Chen Practical Hand-and-a-Half Sword
by Hanwei
Item # RCCASSH2106TS
The Paul Chen Practical Hand-and-a-Half Sword
The Battle Ready Practical Hand and a Half sword is styled on a Albrecht II of Austria sword , a classic design from the early part of the 15th century , with a simple cruciform hilt , flattened diamond section blade and typical hand-and-a-half grip. With a weight of just 3 ¼ lbs. , the Practical Hand and a Half sword handles very well without tiring the reenactor during a long day in the field.
The styling of the Practical Hand and a Half Sword is based on an authentic historical sword but it is tailored to meet the needs of the re-enactor for stage combat at a very affordable price. This very popular and affordable weapon features authentic hilt styling , with a fully tempered un-edged and un-pointed blade.
The Practical Hand and a Half Sword is designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies. The blade is crafted from 1065 high-carbon steel , hardened to HRC 50 , which restricts edge notching to acceptable levels while providing resilience and protection against brittleness. While the blade is substantial , it is fullered to provide balance and good handling characteristics. The Practical HandandaHalf Sword blade features 1/16" wide edges and a rounded tip for safety. The tang is also substantial , with radiused corners at the blade shoulder and no welds. The end of the tang is riveted over the pommel , which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grip is leather covered. The scabbard is fabricated in glass-filled resin, to provide great impact resistance , to eliminate swelling and to minimize blade corrosion problems. The scabbard now features belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most reenactors will decorate the scabbard to match their persona.
This fully functional Battle Ready broad sword is tailored to meet the demands of reenactment and stage combat.
Overall Length: 43 3/4"
Sword Weight: 3 lbs 3 oz
Blade Length: 34"
Blade Material: High-carbon forged steel blade 1/16" wide edges and a rounded tip for safety
Item # RCCASSH2060TS
The Paul Chen Scottish Claymore Sword
Mainstay of the Scottish Highland warriors of the late 15th and 16th centuries, the Claymore had a uniquely styled hilt that sets it apart from other great swords of the period. Typically of hand-and-a-half length, this versatile weapon could deliver great sweeping slashes or powerful thrusts. Replicated from a surviving museum piece the Paul Chen Scottish Claymore Sword is classic in its design, with distinctive sloping quillons terminating in quatrefoils and a high-collared quillon block with langets following the blade fuller. The black leather-covered grip is topped by a globate pommel. Originally carried slung on the back, the Claymore matches perfectly with optional back scabbard.
This fully functional Battle Ready Scottish Claymore sword is tailored to meet the demands of reenactment and stage combat.
Item # RCCS88MASTS
The Cold Steel U.S. Army Officer Saber Sword by Cold Steel
The Cold Steel United States Army Officer's Saber Sword is a truly battle worthy reproduction. The U.S. Army Officer Saber Sword by Cold Steel is faithful in every detail to government specifications offering a highly polished blade, appropriate etching and a quality hilt and scabbard.
The only real changes Cold Steel has made is to drastically improve the sword's performance as a weapon by forging the blade from 1055 Carbon Steel and properly heat treating the blade to a tough spring temper before sharpening.
The Cold Steel United States Marine Corps Officer Mameluke Saber Sword is a truly battle worthy reproduction. The Cold Steel USMC Officer Mameluke Saber Sword by Cold Steel is faithful in every detail to government specifications offering a highly polished blade, appropriate etching and a quality hilt and scabbard.
The only real changes Cold Steel has made is to drastically improve the sword's performance as a weapon by forging the blade from 1055 Carbon Steel and properly heat treating the blade to a tough spring temper before sharpening.
United States 1860 Federal Heavy Cavalry Saber Sword
by Cold Steel
Fully Functional
Battle Ready
Item # RCCS88HCSTS
The United States 1860 Federal Heavy Cavalry Saber Sword by Cold Steel
At the outbreak of the American Civil War, there were two types of sabre swords issued to the Federal Cavalry: "light" and "heavy". The light version saber sword was popular, but the heavy model, dubbed the "Old Wrist Breaker" was the one worth owning, as it was a superior weapon. Its 36" blade offered big reach advantages over most sabers, and its substantial weight gave it the leverage to easily crush bones and sever limbs or even a head with a single blow. The brass guard had three bars to protect the hand and the grip was wire bound leather and capped with a sturdy pommel. In its double ringed, steel scabbard, it could be easily attached to a saddle or to a belt.
After examining and handling a number of original 1860 Heavy Cavalry Sabers, Cold Steel decided to make their own reproduction with a few improvements. The Cold Steel blade is made from 1055 Carbon Steel with a hard spring temper and will pass the British Proof Test.
Item # RCCS88WGSTS
The Two Handed Great Sword by Cold Steel
The Two Handed Great Sword is the biggest sword manufactured by Cold Steel. But don't let its size fool you , as there is nothing awkward or clumsy about this awesome sword. Sure it's big and meant to be carried over the shoulder instead of in a scabbard , but it's extremely well balanced and easily wielded by people of larger stature and physical strength. Weighing 6 lbs. 13.5 oz. with a 397/8" high carbon steel blade , it will make short work of pikemen or swordsmen and will prove equally effective against modern rifle butts and bayonets. To protect the hands from opposing weapons , it features a large guard with side rings plus integral parrying hooks that allow the blade to be shortened for close range slashing and stabbing attacks. The handle is made of wood and covered with leather and is extra long to afford a full two handed grip. What's more , it's capped by a heavy steel pommel that helps counter balance its long blade and serves as an effective weapon in its own right. Each sword comes fully sharpened and battle ready and we're sure you will be thrilled with its fantastic fit and finish. If you're looking for the ultimate in big performance oriented swords , your search is over.
Item # RCCS88HNHTS
The Hand-and-a-Half Sword by Cold Steel
We would be hard pressed to think of a more versatile or effective sword than the "Bastard" or "Hand-and-a-Half Sword" offered here. For a sword of this size , it's amazingly light and fast and tips the scales at approximately 3 lbs. Its 33 1/2" long blade is quite wide so it can produce deep shearing type cuts yet pointed enough to be effective in a thrusting attack. Its long handle is suitable for both a one or two handed grip and is fashioned out of wood covered in black leather. To balance the long blade the butt is capped with a beautiful "scent stopper" pommel which can be a lethal weapon in its own right. Every Hand-and-a-Half Sword reflects the highest standards in workmanship and materials and comes fully sharpened and ready for battle! To safely house the blade a very attractive scabbard made of wood covered with black leather and steel throat and chape is also included.
Item # RCCASSH1070TS
The Paul Chen Practical Katana Sword
The ever-popular Paul Chen Practical Katana gives the martial artist the opportunity to own and use a Hanwei sword at the cost of an economy sword. The blade is forged and differentially hardened, using the same process as the more expensive blades and producing an HRC60 edge and HRC40 back. The temper line is authentic and prominent. Cost savings are effected by using fittings which, while making no claims to authenticity, are very strongly built to withstand the rigors of cutting exercises in the dojo. A replacement Saya is available at $59.00.
This fully functional battle ready Japanese Katana sword is tailored to meet the demands of reenactment and stage combat.
Warrior Series Katana Sword by Cold Steel
Fully Functional
Battle Ready
Item # RCCS88BKTS
The Warrior Series Katana Sword by Cold Steel
The Cold Steel Warrior Series Katana sword is expertly crafted , with attention paid to every detail , making this the ideal collector's choice.
If you are in the market for a strong, good looking, reasonably priced fully functional battle ready Japanese sword , we know you will be happy to own one of these.
There are two basic types of straight bladed swords used in China. One is fairly long and heavy known as the Wu Jian or "Martial Sword". The other is substantially lighter and called a Wen Jian or "Scholar's Sword" and was primarily carried for personal self defense. After studying books and video tapes on the history and use of both weapons , Cold Steel decided to make their own battle worthy Gim (Wu Jian) for serious collectors and practitioners of Chinese Martial Arts. The blade of their Wu Jian is made out of 1055 spring steel and measures 30" long by 11/2" wide. For cutting and slashing , both edges are quite sharp and they terminate in a strong , useful point for stabbing. The traditionally styled guard and pommel are cast out of thick sturdy brass and fit snugly on a stout Rosewood handle that is both highly decorative as well as functional.
The Gim Sword comes with an excellent wood scabbard with brass throat , chape and sword rings and can be worn suspended from the belt or slung over the shoulder.
Item # RCCS88SCFETS
The Quick Draw Sword Cane by Cold Steel
Cold Steel has long extolled the benefits of Cane Swords. These stylish and discreet self-defense instruments are non-threatening and merely dapper. Concealed in plain sight until needed - they can leap into action in an instant!
Cold Steel's latest Sword Cane, the Quick Draw Sword Cane, features a lightweight, durable black aluminum shaft with a rubber ferrule tip to add traction when walking on wet or uneven surfaces.
A quick, swift pull on the Grivory pistol grip handle will release the friction seal and swiftly deploy a tapered 18 inch long , 8mm thick needle-tipped spike threat- deterrent!
The Cold Steel Quick Draw Sword Cane is economical, good looking, and easy to use.
Overall Length: 37 5/8"
Blade Length: 18"
Blade Thickness: 8 mm tapering to 3 mm
Blade Material: 420J2 Steel cylinder with a strong sharp point
Handle Material: Grivory
Total Weight: 16 oz.
Friction Release
Scabbard: Black Anodized Aluminum Shaft
Fully Functional and Battle Ready
$69.99 each
Warning:
All Edged Weapons, Battle Ready or Not, May Injure, Kill
and/or Become Damaged if Used Improperly
